nixos-config/machines/fuuko/services/router.nix

# Home network configuration
#
#     +----------+ +---------------+
#     |          | | +-+-+---+     |
#     |         +|-|-|-|-|+  |     |
# +---+----+    |5 4 3 2 1|  |  +--+--+
# |upstream|    |TL-SG105 |  |  |fuuko|
# +--------+    +---------+  |  +-----+
#                            |
#                       ( clients )
#
# It consists of fuuko as a router (this configuration),
# connected to a TP-LINK TL-SG105E “smart managed” (i.e., it can do VLANs) 5-port switch.
# The upstream comes from some plasic Huawei router/AP I don’t control.
#
# The VLANs are configured as follows:
# Port | VLAN     | ID(s)
# 5    | untagged | 2
# 4    | tagged   | 2,3
# 1-3  | untagged | 3
#
# Wireless currently still is done by a separate GL.iNet GL-MT300N-V2 running OpenWRT,
# but this will be changed to a Intel Wireless-AC 9260 in fuuko at a later date.
{ config, lib, ... }:
let
  domain = "home.sbruder.de";
in
{
  sops.secrets.wg-mullvad-private-key = {
    owner = config.users.users.systemd-network.name;
    sopsFile = ../secrets.yaml;
  };

  boot.kernel.sysctl = {
    "net.ipv4.conf.all.forwarding" = true;
  };

  networking = {
    # networkd handles this
    useDHCP = false;
    # networkd didn’t work that well for this
    nat = {
      enable = true;
      enableIPv6 = true;
      externalInterface = "wg-mullvad";
      internalInterfaces = [ "lan" ];
      internalIPv6s = [ "fd00:80:1::/64" ];
    };
  };

  systemd.network = {
    enable = true;
    netdevs = {
      wan = {
        netdevConfig = {
          Kind = "vlan";
          Name = "wan";
        };
        vlanConfig = {
          Id = 2;
        };
      };
      lan = {
        netdevConfig = {
          Kind = "vlan";
          Name = "lan";
        };
        vlanConfig = {
          Id = 3;
        };
      };
      wg-mullvad = {
        netdevConfig = {
          Kind = "wireguard";
          Name = "wg-mullvad";
        };
        wireguardConfig = {
          PrivateKeyFile = config.sops.secrets.wg-mullvad-private-key.path;
          FirewallMark = 51820;
        };
        wireguardPeers = lib.singleton {
          wireguardPeerConfig = {
            Endpoint = "146.70.117.194:51820";
            PublicKey = "ydXFN45/kROELJrF6id+uIrnS5DvTKSCkZDjfL9De2Q=";
            AllowedIPs = [ "0.0.0.0/0" "::0/0" ];
            PersistentKeepalive = 25;
          };
        };
      };
    };
    networks = {
      physical = {
        name = "enp8s0";
        vlan = [ "wan" "lan" ];
        # no autoconfiguration needed, only tagged VLAN
        networkConfig = {
          LinkLocalAddressing = "no";
          LLDP = "no";
          EmitLLDP = "no";
          IPv6AcceptRA = "no";
          IPv6SendRA = "no";
        };
      };
      wan = {
        name = "wan";
        matchConfig = {
          Type = "vlan";
        };
        networkConfig = {
          # Upstream provides no IPv6 :(
          # If this is not set, it waits and fails systemd-networkd-wait-online
          LinkLocalAddressing = "no";
          IPv6AcceptRA = "no";
        };
        DHCP = "ipv4";
        dhcpV4Config = {
          UseDNS = "no";
        };
      };
      lan = {
        name = "lan";
        matchConfig = {
          Type = "vlan";
        };
        domains = [ domain ];
        address = [ "10.80.1.1/24" "fd00:80:1::1/64" ];
      };
      wg-mullvad = {
        name = "wg-mullvad";
        address = [ "10.66.208.88/32" "fc00:bbbb:bbbb:bb01::3:d057/128" ];
        dns = [ "10.64.0.1" ];
        routingPolicyRules = [
          {
            routingPolicyRuleConfig = {
              FirewallMark = 51820;
              InvertRule = "yes";
              Table = 51820;
              Priority = 10;
              #SuppressPrefixLength = 0; # can’t be used here (forwarding does not work with it)
            };
          }
          # FIXME: those two shouldn’t be necessary
          # It should automatically detect those routes existing and prioritise them
          {
            routingPolicyRuleConfig = {
              To = "10.80.0.0/24";
              Priority = 9;
            };
          }
          {
            routingPolicyRuleConfig = {
              To = "10.80.1.0/24";
              Priority = 9;
            };
          }
        ];
        routes = [
          {
            routeConfig = {
              Gateway = "0.0.0.0"; # point-to-point connection
              Table = 51820;
            };
          }
          {
            routeConfig = {
              Gateway = "::";
            };
          }
        ];
      };
    };
  };
  services.resolved.enable = false;

  services.dnsmasq = {
    enable = true;

    extraConfig = ''
      bogus-priv # do not forward revese lookups of internal addresses
      domain-needed # do not forward names without domain
      interface=lan # only respond to queries from lan
      no-hosts # do not resolve hosts from /etc/hosts
      no-resolv # only use explicitly configured resolvers

      cache-size=10000

      domain=${domain}
      # Allow resolving the router
      interface-name=${config.networking.hostName}.${domain},lan
      interface-name=${config.networking.hostName},lan

      # DHCPv4
      dhcp-range=10.80.1.20,10.80.1.150,12h
      dhcp-option=option:router,10.80.1.1

      # SLAAC (for addresses) / DHCPv6 (for DNS)
      dhcp-range=fd00:80:1::,ra-stateless,ra-names
      dhcp-option=option6:dns-server,fd00:80:1::1
    '';
    servers = [
      "10.64.0.1" # mullvad DNS, should be fastest overall
      #"9.9.9.9" # dns.quad9.net
      #"2620:fe::fe"
    ];
  };

  services.prometheus.exporters.dnsmasq = {
    enable = true;
    listenAddress = config.sbruder.wireguard.home.address;
    leasesPath = "/var/lib/dnsmasq/dnsmasq.leases";
  };

  networking.firewall.allowedUDPPorts = [ 53 67 ];
  networking.firewall.allowedTCPPorts = [ 53 ];
}