# SPDX-FileCopyrightText: 2023-2024 Simon Bruder <simon@sbruder.de>
#
# SPDX-License-Identifier: AGPL-3.0-or-later

define NAT_LAN_IFACES = { "br-lan", "br-guest" }
define PHYSICAL_WAN = "enp1s0"
# only includes interfaces that use NAT
define NAT_WAN_IFACES = { $PHYSICAL_WAN }
# also includes interfaces that do not use NAT
define WAN_IFACES = { $NAT_WAN_IFACES, "wg-he" }

table inet filter {
	chain forward {
		type filter hook forward priority filter; policy drop

		# Use MSS clamping to avoid too large packets not going through the tunnel.
		tcp flags syn / syn,rst tcp option maxseg size set rt mtu

		# plastic router, might be vulnerable (FIXME v6 is still reachable)
		iifname "br-guest" ip daddr "192.168.0.1" drop

		# allow traffic between selected VLANs and wan
		iifname $NAT_LAN_IFACES oifname $WAN_IFACES counter accept
		iifname $WAN_IFACES oifname $NAT_LAN_IFACES ct state established,related counter accept

		# allow lan clients to be publicly reachable
		iifname "wg-he" oifname "br-lan" counter accept

		# traffic from lan to all other vlans is allowed
		iifname "br-lan" oifname $VLAN_BRIDGES counter accept;
		iifname $VLAN_BRIDGES oifname "br-lan" ct state established,related counter accept

		iifname $WAN_IFACES oifname "br-iot" ct state established,related counter accept
	}
}

table ip nat {
	chain postrouting {
		type nat hook postrouting priority filter; policy accept
		oifname $NAT_WAN_IFACES masquerade
	}
}

# Bypass HE tunnel by setting a firewall mark.
# This acts in two places that are handled separatly by nftables:
# Packets from the local host (output hook) and forwared packets (prerouting hook).
# To simplify the handling,
# there is a single chain that handles both,
# which is jumped to from the specific chains.
# Additionally, masquerading is allowed for all packages with a destination of the dynamic set.
table ip6 he-bypass {
	# Dynamically managed by dnsmasq (based on resolved addresses).
	set addresses {
		type ipv6_addr
		comment "IPv6 addresses for which the HE tunnel should be bypassed by using NAT on wan instead"
	}

	# This must be of type route, otherwise no route lookup will be performed
	chain output {
		type route hook output priority mangle
		jump common
	}

	# This does not need to be of type route
	chain prerouting {
		type filter hook prerouting priority mangle
		jump common
	}

	chain common {
		ip6 daddr @addresses mark set 0x7974 counter
	}

	chain postrouting {
		type nat hook postrouting priority filter; policy accept
		oifname $NAT_WAN_IFACES ip6 daddr @addresses masquerade
	}
}

table ip6 public-access {
	chain input {
		type filter hook input priority filter; policy accept

		iifname "wg-he" oifname "br-lan" counter accept
	}
}

# Only allow select connections from and to (physical) wan,
# overriding NixOS firewall in some cases.
table inet restrict-wan {
	# Priorities must be higher than filter (0),
	# which the NixOS firewall uses.
	chain input {
		type filter hook input priority -50; policy accept

		# accept responses
		iifname $PHYSICAL_WAN ct state established,related counter accept

		# accept icmpv6
		iifname $PHYSICAL_WAN icmpv6 type { nd-neighbor-solicit, nd-router-advert, nd-neighbor-advert } accept

		# drop everything else
		iifname $PHYSICAL_WAN counter drop
	}

	# This handles all packets (local and forwarded)
	chain postrouting {
		type filter hook postrouting priority 0; policy accept

		# accept connections over physical wan
		oifname $PHYSICAL_WAN counter accept
	}
}

# Traffic control
# Needs output and prerouting to match packets from localhost and lan
table inet tc {
	chain output {
		type route hook output priority mangle

		# hardcoded, but unlikely to change
		ip daddr { "9.9.9.9", "149.112.112.112" } meta priority set 1:3 counter return comment "DNS (4)"
		ip6 daddr { "2620:fe::9", "2620:fe::fe" } meta priority set 1:3 counter return comment "DNS (6)"

		jump common
	}

	chain forward {
		type filter hook forward priority mangle
		jump common
	}

	chain common {
		iifname "br-guest" meta priority set 1:a counter return comment "guest network"

		meta l4proto tcp meta length 1-64 meta priority set 1:3 counter return comment "small tcp packets"

		tcp dport 22 ip  dscp af21 meta priority set 1:4 counter return comment "interactive SSH (4)"
		tcp dport 22 ip6 dscp af21 meta priority set 1:4 counter return comment "interactive SSH (6)"

		meta l4proto udp ip dscp af13 meta priority set 1:5 ip dscp set cs0 counter return comment "fuuko torrent"

		ip  daddr 168.119.176.53       tcp dport 443 ip  dscp af12 meta priority set 1:9 counter return comment "restic (4)"
		ip6 daddr 2a01:4f8:c012:2f4::1 tcp dport 443 ip6 dscp af12 meta priority set 1:9 counter return comment "restic (6)"

		meta l4proto { tcp, udp } th dport 443 meta priority set 1:6 counter return comment "HTTPS"

		ip daddr 168.119.176.53 udp dport 51820 meta priority set 1:7 counter return comment "wg-home"

		meta l4proto { tcp, udp } ip  dscp ef meta priority set 1:8 counter return comment "VoIP (4)"
		meta l4proto { tcp, udp } ip6 dscp ef meta priority set 1:8 counter return comment "VoIP (6)"
		meta l4proto { tcp, udp } th dport 64738 meta priority set 1:8 counter return comment "Mumble"
	}
}

# Tracing infrastructure, can be used for debugging (nft monitor trace)
table inet trace {
	chain prerouting {
		type filter hook prerouting priority raw - 1
		jump common
	}

	chain output {
		type filter hook output priority raw - 1
		jump common
	}

	chain common {
		# Add tracing rule here
		# … meta nftrace set 1
		# DO NOT COMMIT ANY TRACING RULES
	}
}