# Home network configuration
#            (2.5GbE clients)
#                  | |
#     +----------+ +----------+
#     |          | | | |      | (1GbE clients)
#     |          | | | |     +|-|-|-|-|+
# +---+----+   +-+-+-+-+-+   |5 4 3 2 1|
# |upstream|   | 1 2 3 4 |   |TL-SG105 |
# +--------+   | shinobu |   +---------+
#              +---------+
#
# It consists of shinobu as a router (this configuration),
# connected to a TP-LINK TL-SG105E “smart managed” (i.e., it can do VLANs) 5-port switch.
# The upstream comes (for now) from a PŸUR “WLAN-Kabelbox” (Compal CH7467CE).
# Sadly, I could not enable bridge mode on it, so the packets now go through (at least) three layers of NAT:
# device → NAT on shinobu → NAT on plastic router → PŸUR CGNAT
#
# Because the switch only supports GbE,
# the two clients I currently have with support for 2.5GbE are connected
# directly to the two remaining network interfaces on shinobu.
# Once I have more devices with support for 2.5GbE
# or I find a good deal on a matching switch,
# I will change this.
#
# Wireless is configured by providing the whole hostapd configuration file as a secret.
# Once nixpkgs PR 222536 is merged, I will migrate to using the NixOS module.
# Thanks to Intel’s wisdom, it’s not possible to use 5GHz in AP mode.
{ config, lib, pkgs, ... }:
let
  cfg = import ./common.nix;
in
{
  imports = [
    ./dnsmasq.nix
    ./nft.nix
    ./tc.nix
    ./wlan.nix
  ];

  boot.kernel.sysctl = {
    "net.ipv4.conf.all.forwarding" = true;
    "net.ipv6.conf.all.forwarding" = true;
  };

  environment.systemPackages = with pkgs; [
    ethtool
  ];

  networking.useDHCP = false;

  systemd.network = {
    enable = true;
    # not all interfaces need to be up
    wait-online.extraArgs = [ "--any" ];
    netdevs = {
      br-lan = {
        netdevConfig = {
          Name = "br-lan";
          Kind = "bridge";
        };
      };
    };
    networks = {
      wan = {
        name = "enp1s0";
        DHCP = "ipv4";
        networkConfig = {
          IPv6AcceptRA = "yes";
        };
        dhcpV4Config = {
          UseDNS = "no";
        };
        ipv6AcceptRAConfig = {
          # Only use RA
          DHCPv6Client = false;
          UseDNS = "no";
        };
      };
      lan1 = {
        name = "enp2s0";
        bridge = [ "br-lan" ];
      };
      lan2 = {
        name = "enp3s0";
        bridge = [ "br-lan" ];
      };
      lan3 = {
        name = "enp4s0";
        bridge = [ "br-lan" ];
      };
      br-lan = {
        name = "br-lan";
        domains = [ cfg.domain ];
        address = [ "10.80.1.1/24" "fd00:80:1::1/64" ];
      };
    };
  };
  services.resolved.enable = false;
}