# Home network configuration
#            (2.5GbE clients)
#                  | |
#     +----------+ +----------+
#     |          | | | |      | (1GbE clients)
#     |          | | | |     +|-|-|-|-|+
# +---+----+   +-+-+-+-+-+   |5 4 3 2 1|
# |upstream|   | 1 2 3 4 |   |TL-SG105 |
# +--------+   | shinobu |   +---------+
#              +---------+
#
# It consists of shinobu as a router (this configuration),
# connected to a TP-LINK TL-SG105E “smart managed” (i.e., it can do VLANs) 5-port switch.
# The upstream comes (for now) from a PŸUR “WLAN-Kabelbox” (Compal CH7467CE).
# Sadly, I could not enable bridge mode on it, so the packets now go through (at least) four layers of NAT:
# device → NAT on shinobu (→ NAT on plastic router → PŸUR CGNAT) → NAT on VPN
#
# Because the switch only supports GbE,
# the two clients I currently have with support for 2.5GbE are connected
# directly to the two remaining network interfaces on shinobu.
# Once I have more devices with support for 2.5GbE
# or I find a good deal on a matching switch,
# I will change this.
#
# Wireless is configured by providing the whole hostapd configuration file as a secret.
# Once nixpkgs PR 222536 is merged, I will migrate to using the NixOS module.
# Thanks to Intel’s wisdom, it’s not possible to use 5GHz in AP mode.
{ config, lib, pkgs, ... }:
let
  domain = "home.sbruder.de";

  noVpnFwMark = 10000;
in
{
  sops.secrets.wg-upstream-private-key = {
    owner = config.users.users.systemd-network.name;
    sopsFile = ../secrets.yaml;
  };
  sops.secrets.hostapd-config = {
    sopsFile = ../secrets.yaml;
  };

  boot.kernel.sysctl = {
    "net.ipv4.conf.all.forwarding" = true;
    "net.ipv6.conf.all.forwarding" = true;
  };

  networking = {
    # networkd handles this
    useDHCP = false;

    nftables = {
      enable = true;
      ruleset = ''
        define NAT_LAN_IFACES = { "br-lan" }
        define NAT_WAN_IFACES = { "wg-upstream" }
        define PHYSICAL_WAN = "enp1s0"
        define MASQUERADE_IFACES = { $NAT_WAN_IFACES, $PHYSICAL_WAN }
        define VUEKO_V4 = 168.119.176.53
        define VUEKO_V6 = 2a01:4f8:c012:2f4::1
        define VUEKO_PORT = 51820
        define WG_UPSTREAM_ENDPOINT = ${lib.elemAt (lib.splitString ":" (lib.elemAt config.systemd.network.netdevs.wg-upstream.wireguardPeers 0).wireguardPeerConfig.Endpoint) 0}
        define PLASTIC_ROUTER_V4 = 192.168.0.1

        table inet filter {
          chain forward {
            type filter hook forward priority filter; policy drop

            # Use MSS clamping
            # to avoid too large packets from client on the lan
            # not going through the tunnel.
            iifname wg-upstream tcp flags syn / syn,rst tcp option maxseg size set rt mtu
            oifname wg-upstream tcp flags syn / syn,rst tcp option maxseg size set rt mtu

            iifname $NAT_LAN_IFACES oifname $NAT_WAN_IFACES counter accept
            iifname $NAT_WAN_IFACES oifname $NAT_LAN_IFACES ct state established,related counter accept

            # plastic router
            iifname $NAT_LAN_IFACES oifname $PHYSICAL_WAN ip daddr $PLASTIC_ROUTER_V4 counter accept
            iifname $PHYSICAL_WAN oifname $NAT_LAN_IFACES ip saddr $PLASTIC_ROUTER_V4 ct state established,related counter accept

            iifname $NAT_LAN_IFACES oifname $PHYSICAL_WAN ip daddr $VUEKO_V4 udp dport $VUEKO_PORT counter accept
            iifname $PHYSICAL_WAN oifname $NAT_LAN_IFACES ip saddr $VUEKO_V4 udp sport $VUEKO_PORT ct state established,related counter accept
            iifname $NAT_LAN_IFACES oifname $PHYSICAL_WAN ip6 daddr $VUEKO_V6 udp dport $VUEKO_PORT counter accept
            iifname $PHYSICAL_WAN oifname $NAT_LAN_IFACES ip6 saddr $VUEKO_V6 udp sport $VUEKO_PORT ct state established,related counter accept
          }
        }

        table inet nat {
          chain prerouting {
            type nat hook prerouting priority filter; policy accept
          }

          chain postrouting {
            type nat hook postrouting priority filter; policy accept
            oifname $MASQUERADE_IFACES masquerade
          }
        }

        table inet mangle {
          chain output {
            type route hook output priority mangle

            # Add fwmark noVpnMark to packets to vueko, so it will get routed correctly
            ip daddr $VUEKO_V4 udp dport $VUEKO_PORT mark set ${toString noVpnFwMark} counter
            ip6 daddr $VUEKO_V6 udp dport $VUEKO_PORT mark set ${toString noVpnFwMark} counter
          }
        }

        # Only allow select connections from and to (physical) wan,
        # overriding NixOS firewall in some cases.
        table inet restrict-wan {
          # Priorities must be higher than filter (0),
          # which the NixOS firewall uses.

          chain input {
            type filter hook input priority -50; policy accept
            # accept responses
            iifname $PHYSICAL_WAN ct state established,related counter accept
            # accept icmpv6
            iifname $PHYSICAL_WAN icmpv6 type { nd-neighbor-solicit, nd-router-advert, nd-neighbor-advert } accept
            # drop everything else
            iifname $PHYSICAL_WAN counter drop
          }

          chain output {
            type filter hook output priority -50; policy accept
            # accept connections to plastic router
            oifname $PHYSICAL_WAN ip daddr $PLASTIC_ROUTER_V4 accept
            # accept icmpv6
            oifname $PHYSICAL_WAN icmpv6 type { nd-neighbor-solicit, nd-router-advert, nd-neighbor-advert } accept
            # accept connections to selected endpoints
            oifname $PHYSICAL_WAN ip daddr $WG_UPSTREAM_ENDPOINT counter accept
            oifname $PHYSICAL_WAN ip daddr $VUEKO_V4 counter accept
            oifname $PHYSICAL_WAN ip6 daddr $VUEKO_V6 counter accept
            # drop all other packets
            oifname $PHYSICAL_WAN counter drop
          }
        }
      '';
    };
  };

  systemd.network = {
    enable = true;
    # not all interfaces need to be up
    wait-online.extraArgs = [ "--any" ];
    netdevs = {
      br-lan = {
        netdevConfig = {
          Name = "br-lan";
          Kind = "bridge";
        };
      };
      wg-upstream = {
        netdevConfig = {
          Kind = "wireguard";
          Name = "wg-upstream";
        };
        wireguardConfig = {
          PrivateKeyFile = config.sops.secrets.wg-upstream-private-key.path;
          FirewallMark = 51820;
        };
        wireguardPeers = lib.singleton {
          wireguardPeerConfig = {
            Endpoint = "193.32.248.71:51820";
            PublicKey = "eprzkkkSbXCANngQDo305DIAvkKAnZaN71IpTNaOoTk=";
            AllowedIPs = [ "0.0.0.0/0" "::0/0" ];
            PersistentKeepalive = 25;
          };
        };
      };
    };
    networks = {
      wan = {
        name = "enp1s0";
        DHCP = "ipv4";
        networkConfig = {
          IPv6AcceptRA = "yes";
        };
        dhcpV4Config = {
          UseDNS = "no";
        };
        ipv6AcceptRAConfig = {
          # Only use RA
          DHCPv6Client = false;
          UseDNS = "no";
        };
      };
      lan1 = {
        name = "enp2s0";
        bridge = [ "br-lan" ];
      };
      lan2 = {
        name = "enp3s0";
        bridge = [ "br-lan" ];
      };
      lan3 = {
        name = "enp4s0";
        bridge = [ "br-lan" ];
      };
      br-lan = {
        name = "br-lan";
        domains = [ domain ];
        address = [ "10.80.1.1/24" "fd00:80:1::1/64" ];
      };
      wg-upstream = {
        name = "wg-upstream";
        address = [ "10.66.208.88/32" "fc00:bbbb:bbbb:bb01::3:d057/128" ];
        routingPolicyRules = [
          {
            routingPolicyRuleConfig = {
              Family = "both"; # default is only ipv4
              FirewallMark = 51820;
              InvertRule = "yes";
              Table = 51820;
              Priority = 10;
              #SuppressPrefixLength = 0; # can’t be used here (forwarding does not work with it)
            };
          }
          # FIXME: those two shouldn’t be necessary
          # It should automatically detect those routes existing and prioritise them
          # LAN (v4)
          {
            routingPolicyRuleConfig = {
              To = "10.80.0.0/24";
              Priority = 9;
            };
          }
          # LAN (v6)
          {
            routingPolicyRuleConfig = {
              To = "fd00:80:1::/64";
              Priority = 9;
            };
          }
          # wg-home
          {
            routingPolicyRuleConfig = {
              To = "10.80.1.0/24";
              Priority = 9;
            };
          }
          # vueko (v4) for wg-home
          {
            routingPolicyRuleConfig = {
              To = "168.119.176.53";

              FirewallMark = noVpnFwMark;
              Priority = 9;
            };
          }
          # plastic router
          {
            routingPolicyRuleConfig = {
              To = "192.168.0.0/24";
              Priority = 9;
            };
          }
        ];
        routes = [
          {
            routeConfig = {
              Gateway = "0.0.0.0"; # point-to-point connection
              Table = 51820;
            };
          }
          {
            routeConfig = {
              Gateway = "::";
              Table = 51820;
            };
          }
        ];
      };
    };
  };
  services.resolved.enable = false;

  services.dnsmasq = {
    enable = true;

    settings = {
      bogus-priv = true; # do not forward revese lookups of internal addresses
      domain-needed = true; # do not forward names without domain
      interface = "br-lan"; # only respond to queries from lan
      no-hosts = true; # do not resolve hosts from /etc/hosts
      no-resolv = true; # only use explicitly configured resolvers

      cache-size = 10000;

      inherit domain;

      # Allow resolving the router
      interface-name = [
        "${config.networking.hostName}.${domain},br-lan"
        "${config.networking.hostName},br-lan"
      ];

      # DHCPv4
      dhcp-range = [
        "10.80.1.20,10.80.1.150,12h" # DHCPv4
        "fd00:80:1::,ra-stateless,ra-names" # SLAAC (for addresses) / DHCPv6 (for DNS)
      ];
      dhcp-option = [
        "option:router,10.80.1.1"
        "option6:dns-server,fd00:80:1::1"
      ];

      # Despite its name, the switch does not have a “smart” configuration,
      # that would allow me to tell it not to get DHCP from wan,
      # but from lan instead.
      # So it has to use static configuration.
      host-record = "switchviech,switchviech.${domain},10.80.1.19";
      server = [
        "127.0.0.1#5053"
      ];
    };
  };
  systemd.services.dnsmasq.after = [ "systemd-networkd.service" ];

  services.prometheus.exporters.dnsmasq = {
    enable = true;
    listenAddress = config.sbruder.wireguard.home.address;
    leasesPath = "/var/lib/dnsmasq/dnsmasq.leases";
  };

  networking.firewall.allowedUDPPorts = [ 53 67 ];
  networking.firewall.allowedTCPPorts = [ 53 ];

  # Wireless
  boot.kernelModules = [ "nl80211" ];

  environment.systemPackages = with pkgs; [
    iw
    wirelesstools
  ];

  # The service is mostly taken from nixpkgs pr 222536.
  systemd.services.hostapd = {
    path = with pkgs; [ hostapd ];
    after = [ "sys-subsystem-net-devices-wlp5s0.device" ];
    bindsTo = [ "sys-subsystem-net-devices-wlp5s0.device" ];
    wantedBy = [ "multi-user.target" ];

    serviceConfig = {
      ExecStart = "${pkgs.hostapd}/bin/hostapd ${config.sops.secrets.hostapd-config.path}";
      Restart = "always";
      ExecReload = "${pkgs.coreutils}/bin/kill -HUP $MAINPID";
      RuntimeDirectory = "hostapd";

      # Hardening
      LockPersonality = true;
      MemoryDenyWriteExecute = true;
      DevicePolicy = "closed";
      DeviceAllow = "/dev/rfkill rw";
      NoNewPrivileges = true;
      PrivateUsers = false; # hostapd requires true root access.
      PrivateTmp = true;
      ProtectClock = true;
      ProtectControlGroups = true;
      ProtectHome = true;
      ProtectHostname = true;
      ProtectKernelLogs = true;
      ProtectKernelModules = true;
      ProtectKernelTunables = true;
      ProtectProc = "invisible";
      ProcSubset = "pid";
      ProtectSystem = "strict";
      RestrictAddressFamilies = [
        "AF_INET"
        "AF_INET6"
        "AF_NETLINK"
        "AF_UNIX"
      ];
      RestrictNamespaces = true;
      RestrictRealtime = true;
      RestrictSUIDSGID = true;
      SystemCallArchitectures = "native";
      SystemCallFilter = [
        "@system-service"
        "~@privileged"
        "@chown"
      ];
      UMask = "0077";
    };
  };

  services.https-dns-proxy = {
    enable = true;
    provider = {
      kind = "custom";
      ips = [ "9.9.9.9" "149.112.112.112" ];
      url = "https://dns.quad9.net/dns-query";
    };
  };
}