My NixOS configuration and other infrastructure related things
Find a file
2021-01-30 13:27:29 +01:00
.git-crypt Add 1 git-crypt collaborator 2020-08-22 17:45:46 +02:00
machines sayuri: Use performance scaling governor 2021-01-29 15:54:59 +01:00
modules Use nixos-hardware for hardware configuration 2021-01-29 15:50:16 +01:00
nix Use nixos-hardware for hardware configuration 2021-01-29 15:50:16 +01:00
pkgs osu-lazer-container: Ensure state directory exists 2021-01-10 21:39:27 +01:00
users/simon mpd: Only enable when gui is enabled 2021-01-30 13:27:29 +01:00
.envrc Initial commit 2020-08-22 17:44:39 +02:00
.gitattributes Initial commit 2020-08-22 17:44:39 +02:00
.gitignore Ignore all results 2020-12-17 09:50:25 +01:00
deploy.nix Use nixos-hardware for hardware configuration 2021-01-29 15:50:16 +01:00
LICENSE Initial commit 2020-08-22 17:44:39 +02:00
README.md Remove dotfiles from README 2020-11-07 19:22:32 +01:00
shell.nix deploy: Do not fail with broken local config 2021-01-29 16:04:38 +01:00

NixOS configuration

How to install

This guide describes how to install this configuration (or any NixOS configuration) with GPT and legacy (BIOS) boot.

If you do not have a wired connection, first set up wifi

wpa_passphrase "SSID" "PSK" | sudo wpa_supplicant -B -i wlp4s0 -c/dev/stdin

Create the partition table (enter the indented lines in the repl).

sudo parted /dev/sdX
  mktable GPT
  mkpart primary 1MiB 2MiB
  mkpart primary 2MiB 500MiB
  mkpart primary 500MiB 100%
  set 1 bios_grub on
  disk_toggle pmbr_boot
  quit

Format encrypted partition and open it

sudo cryptsetup luksFormat /dev/sdX3
sudo cryptsetup luksOpen /dev/sdX3 HOSTNAME-pv

Create LVM (replace 8G with desired swap size)

sudo pvcreate /dev/mapper/HOSTNAME-pv
sudo vgcreate HOSTNAME-vg /dev/mapper/HOSTNAME-pv
sudo lvcreate -L 8G -n swap HOSTNAME-vg
sudo lvcreate -l '100%FREE' -n root HOSTNAME-vg

Hint: If you have to reboot to the installation system later because something went wrong and you need access to the LVM (but dont know LVM), do the following after opening the luks partition: sudo vgchange -ay

Create filesystems

sudo mkfs.ext2 /dev/sdX2
sudo mkfs.ext4 -L root /dev/HOSTNAME-vg/root
sudo mkswap -L swap /dev/HOSTNAME-vg/swap

Mount the file systems and activate swap

sudo mount /dev/HOSTNAME-vg/root /mnt
sudo mkdir /mnt/boot
sudo mount /dev/sdX2 /mnt/boot
sudo swapon /dev/HOSTNAME-vg/swap

Create the configuration (see below) and copy this repository to your new home directory (e.g. /mnt/home/simon/nixos).

Add a symlink as the global configuration

sudo mkdir -p /mnt/etc/nixos/
sudo ln -s ../../home/simon/nixos/machines/nunotaba/configuration.nix /mnt/etc/nixos/configuration.nix

Generate hardware configuration and copy hardware configuration to machine configuration

sudo nixos-generate-config --root /mnt/
sudo mv /mnt/etc/nixos/hardware-configuration.nix /mnt/home/simon/nixos/machines/nunotaba/hardware-configuration.nix
sudo ln -s ../../home/simon/nixos/machines/nunotaba/hardware-configuration.nix /mnt/etc/nixos/hardware-configuration.nix

Install NixOS sudo nixos-install --no-root-passwd

Enter the target as a container and set a user password

sudo cp /etc/resolv.conf /mnt/etc/ # see https://github.com/NixOS/nixpkgs/issues/39665
nixos-enter
passwd simon
^D # nixos-enter
sudo rm /mnt/etc/resolv.conf
reboot

How to add new device

  • Copy the config from the device that is similar to the new one
  • Import profiles/modules you want
  • Change settings in configuration.nix
  • Change secrets

License

MIT License