nixos-config/README.md

4.1 KiB
Raw Blame History

NixOS configuration

Structure

  • machines: Machine-specific configuration
    • README.md: Short overview of the hardware and usage of the machine
    • configuration.nix: Main configuration
    • hardware-configuration.nix: Hardware-specific configuration. It should not depend on any modules or files from this repository, since it is used for initial setup.
    • services: Non-trivial machine-specific configuration related to a specific service the machine provides.
    • secrets: Nix expressions that include information that is not meant to be visible to everyone (e.g. accounts, password hashes, private information etc.) or secrets for services that dont provide any other (easy) way of specifying them and whose secrets leaking does not pose a huge threat
  • modules: Custom modules. Many are activated by default, since I want them on all systems.
  • pkgs: My nixpkgs overlay
  • users/simon: home-manager configuration

Secrets are managed with sops-nix.

Machines can be deployed with nix run .#deploy/hostname, LUKS encrypted systems can be unlocked over network with nix run .#unlock/hostname.

How to install

This guide describes how to install this configuration with GPT and BIOS boot. It is not a one-fits-all guide, but the base for what I use for interactive systems. Servers and specialised systems may need a different setup (e.g. swap with random luks passphrase and no LVM).

Set up wifi if no wired connection is available:

wpa_passphrase "SSID" "PSK" | wpa_supplicant -B -i wlp4s0 -c/dev/stdin

Create the partition table (enter the indented lines in the repl):

parted /dev/sdX
  mktable GPT
  mkpart primary 1MiB 2MiB
  mkpart primary 2MiB 500MiB
  mkpart primary 500MiB 100%
  set 1 bios_grub on
  disk_toggle pmbr_boot
  quit

On UEFI:

parted /dev/nvmeXnY
  mktable GPT
  mkpart ESP 1MiB 512MiB
  mkpart root 512MiB 100%
  set 1 esp on
  quit

Format encrypted partition and open it:

cryptsetup luksFormat --type luks2 /dev/sdX3
cryptsetup open --type luks2 /dev/sdX3 HOSTNAME-pv

Create LVM (replace 8G with desired swap size):

pvcreate /dev/mapper/HOSTNAME-pv
vgcreate HOSTNAME-vg /dev/mapper/HOSTNAME-pv
lvcreate -L 8G -n swap HOSTNAME-vg
lvcreate -l '100%FREE' -n root HOSTNAME-vg

Hint: If you have to reboot to the installation system later because something went wrong and you need access to the LVM (but dont know LVM), do the following after opening the luks partition: vgchange -ay.

Create filesystems:

mkfs.ext2 /dev/sdX2
mkfs.btrfs -L root /dev/HOSTNAME-vg/root
mkswap -L swap /dev/HOSTNAME-vg/swap

On UEFI:

mkfs.fat -F 32 -n boot /dev/nvmeXnYpZ
mkfs.btrfs -L root /dev/HOSTNAME-vg/root
mkswap -L swap /dev/HOSTNAME-vg/swap

Mount the file systems and activate swap:

mount /dev/HOSTNAME-vg/root /mnt
mkdir /mnt/boot
mount /dev/sdX2 /mnt/boot
swapon /dev/HOSTNAME-vg/swap

Generate hardware configuration and copy hardware configuration to machine configuration (skip this step if you already have a hardware-configuration for this machine):

nixos-generate-config --root /mnt/

Modify the hardware configuration as needed and add it to the machine configuration in this repository. If necessary, create the machine configuration first by basing it on an already existing configuration and adding an entry to machines/default.nix. Then copy this repository to the target machine and run (--impure is needed since /mnt/nix/store is not in /nix/store):

nixos-install --no-channel-copy --impure --flake /path/to/repository#hostname

Add the krops sentinel file:

mkdir -p /mnt/var/src
touch /mnt/var/src/.populate

Reboot.

License

Unless otherwise noted in the specific files or directories, the files in this repository are licensed under the MIT License. This only applies to the nix expressions, not the built system or package closures. Patches may also be licensed differently, since they may be derivative works of the packages to which they apply.